The short version
- Lithium disilicate (e.max) is roughly two to three times stronger than feldspathic porcelain: about 360–470 MPa vs 120–180 MPa in published figures.12
- In a review of 6,500 porcelain veneers, 10-year survival was 95.5% overall, and feldspathic veneers failed more often than non-feldspathic ones.3
- Lithium disilicate is highly translucent, but translucency drops as any ceramic gets thicker; in one lab study e.max's score fell from 34.2 at 0.5 mm to 23.2 at 1.0 mm.4
- Neither material is automatically more natural. Shade, thickness, the tooth color underneath and the ceramist's skill matter more.
- Ask every clinic to name the ceramic, the lab and the planned enamel reduction in writing.5
Two ceramics, two ways of making a veneer
"Porcelain veneers" is a broad label. In practice, most porcelain veneers made today fall into two families, and the difference between them is as much about how the lab builds the veneer as about the material.
Feldspathic porcelain is the traditional glass-based dental porcelain. A ceramist builds it up in layers of powder and liquid, then fires it, which gives a skilled technician a lot of control over how color and translucency change from the gumline to the edge. The trade-off is strength. A 2021 clinical trial report in Operative Dentistry lists feldspathic and leucite-reinforced ceramics at about 120–180 MPa of flexural strength.1
Lithium disilicate, sold most widely as IPS e.max, is a glass-ceramic reinforced with crystals. The lab either presses it from a heated ingot or mills it from a block. The same 2021 report lists it at about 400 MPa for the pressed version and 360 MPa for the milled one,1 and the manufacturer, Ivoclar, gives a mean biaxial flexural strength of 470 MPa for IPS e.max Press.2 Different test methods give different numbers, but every source puts lithium disilicate at roughly two to three times the strength of feldspathic porcelain.
The ADA's general description applies to both: porcelain veneers are strong, long-lasting and natural-looking, they usually cost more than composite, and treatment is not reversible because enamel is removed.5 For the broader porcelain-versus-resin decision, see the site's porcelain vs composite guide. This article assumes you've already chosen ceramic and want to know which kind.
E.max vs feldspathic, side by side
| Feldspathic porcelain | Lithium disilicate (e.max) | |
|---|---|---|
| What it is | Glass-based porcelain | Crystal-reinforced glass-ceramic2 |
| How it's made | Layered by hand and fired | Pressed from an ingot or milled from a block1 |
| Flexural strength (reported) | About 120–180 MPa1 | About 360–470 MPa depending on version and test12 |
| Thinnest veneers | Depends on the lab and case | Down to 0.3 mm wall thickness, per the maker2 |
| Failures in the largest review | Higher: 66 of 1,614 in the time-to-failure data | "Non-feldspathic" group: 40 of 1,5763 |
| Where it tends to fit | Small, highly individual cases where a ceramist can layer color; low-stress bites | Larger cases, thinner veneers, patients who want more strength margin |
Strength figures come from different test methods and are for comparison only. The review's "non-feldspathic" group includes more than lithium disilicate.3
Which one actually looks more natural
This is where marketing gets ahead of the evidence. Feldspathic porcelain has a reputation as the "artist's" material because it's built up by hand, and in the hands of an excellent ceramist it can reproduce subtle color shifts very well. But lithium disilicate is also highly translucent. In a 2017 lab study comparing it with several high-translucency zirconia materials, IPS e.max CAD HT was the most translucent material tested at every thickness.4
Ivoclar sells e.max Press ingots at several translucency levels, from a high-translucency option it describes as "similar to that of natural enamel," to a low-translucency option "similar to that of natural dentin," to medium- and high-opacity versions.2 That range is the real point. Which material looks most natural on your teeth depends on a handful of decisions that matter more than the material name:
- Thickness. Ceramic gets less translucent as it gets thicker. In the same lab study, the lithium disilicate's translucency score fell from 34.2 at 0.5 mm to 23.2 at 1.0 mm.4 A veneer made thick to cover a dark tooth will look more opaque whatever it's made of.
- The color underneath. A translucent veneer on a dark or stained tooth lets that color show through. Masking it takes a more opaque ceramic, more thickness or both.
- Shade and shape. An overly bright shade or uniform, flat surfaces read as artificial on any ceramic.
- The ceramist. Hand layering and surface texture depend on the technician. Ask which lab makes the veneers and whether you can see that lab's work on cases like yours.
Neither material is automatically more natural. A thin, well-shaded lithium disilicate veneer and a well-layered feldspathic veneer can both look like teeth. A thick, too-white veneer of either kind won't. Judge the plan for shade, thickness and shape, not the material name.
Durability: what the clinical data shows
The largest pooled analysis found is a 2021 systematic review in the Journal of Clinical Medicine that included 6,500 porcelain laminate veneers. It estimated a 10-year cumulative survival of 95.5% across all porcelain types.3 When the authors compared materials, feldspathic veneers failed significantly more often than non-feldspathic ones (66 of 1,614 versus 40 of 1,576 in the time-to-failure data), and they attributed the gap to feldspathic porcelain's lower mechanical properties.3
That doesn't make feldspathic a poor choice. The difference is a few percentage points in a material that performs well overall, and a study cited in the 2021 Operative Dentistry report found 93.5% survival for feldspathic veneers over 10 years.1 For lithium disilicate specifically, that report summarizes published success rates of 93.5% to 100% over 1 to 6 years, and its own 12-month trial found no fractures and no difference between pressed and milled e.max veneers.1 A 2024 randomized trial using pressed e.max to close gaps reported 95% survival at two years.6
The review also flagged what predicts failure regardless of material:3
- Fracture was the most common complication and debonding the second, with most of both occurring within roughly two years of cementation.
- Bonding to dentin is weaker than bonding to enamel, and large areas of exposed dentin were associated with high failure rates.
- Secondary decay was uncommon and mostly appeared after five years.
So the amount of tooth removed, and whether the margins stay in enamel, can matter as much as the ceramic. The ADA also cautions that veneers may not suit people who clench or grind, or who have a deep overbite.5 If you grind, that points toward the stronger material and a night guard, and it's worth asking about before choosing.
Ask several clinics to quote the same case and name the ceramic, the lab and the planned thickness in writing.
Compare quotesCost and what Medellín quotes usually list
Published prices for these materials in Colombia are thin. One marketplace snapshot, Bookimed's Colombia page for E.max veneers updated in October 2026, lists seven clinics and a range of $300 to $450 with an average of $380.7 Treat that as a rough range, not a quote: the page doesn't say the figure is per tooth, and the five Medellín clinics it lists show "price on request."7 No comparable published figure was found for feldspathic veneers in Medellín, so a clinic quoting a premium for feldspathic should explain what the extra lab work involves.
When you compare quotes, the material line alone isn't enough. A clear quote names the ceramic (feldspathic, pressed lithium disilicate or milled lithium disilicate), the lab that will make it, the number of teeth, whether a mock-up and temporaries are included, and what happens if a veneer debonds or chips. The cost guide shows how veneer quotes break down, and Colombia Dentist covers dental options across the country if you're comparing cities.
How to choose, and what to ask
A reasonable way to think about it:
- Lithium disilicate is the more forgiving default for most people, especially for six or more teeth, thinner veneers, or anyone with some bite force or grinding history. Its strength gives more margin.31
- Feldspathic can make sense for a few front teeth in a low-stress bite, when the case calls for very subtle color layering and you've seen that lab's feldspathic work.
- Either is a poor choice if the plan calls for heavy reduction into dentin without a clear reason.3
- Ask which ceramic, by name. "Porcelain" or "premium" on a quote isn't enough. You want the material and whether it's pressed, milled or layered.
- Ask about thickness and preparation. How many millimeters of enamel will be removed, and will the margins stay in enamel?3
- Ask about the lab. Is it in-house or outside, and can you see its work on teeth like yours?
- Ask for a mock-up. A trial smile lets you judge shade and shape before anything permanent happens. The site's process guide explains where it fits.
- Ask about repairs at home. If a veneer chips after you fly back, can a dentist at home repair or replace it, and does the clinic share the lab details?
- Check the dentist's registration. Colombia's ReTHUS registry lists authorized health professionals.8
For smile-design planning beyond the material choice, SmileProud covers full smile makeovers. And after placement, the site's aftercare guide covers habits that protect ceramic veneers of either type.
Want clinics to quote the same request?
Tell us what you want to change, how many teeth you're considering and when you might travel. We can share your request with up to 3 independent providers. WhatsApp or email, no obligation.
Compare veneer quotesSee cost examplesQuick answers
Are e.max veneers the same as porcelain veneers?
E.max is a brand of lithium disilicate glass-ceramic, which is one kind of porcelain veneer. Feldspathic porcelain is the other common kind. Quotes that just say "porcelain" don't tell you which one you're getting, so ask.
Which is stronger, e.max or feldspathic?
Lithium disilicate is stronger. Published figures put it at about 360 to 470 MPa of flexural strength, versus about 120 to 180 MPa for feldspathic and leucite ceramics. A 2021 review also found feldspathic veneers failed more often than non-feldspathic ones.
Do feldspathic veneers look more natural than e.max?
Not automatically. Feldspathic porcelain is layered by hand, which lets a skilled ceramist build subtle color, but lithium disilicate is also highly translucent and comes in several translucency levels. Thickness, shade choice and the lab's skill usually matter more than the material name.
How long do porcelain veneers last?
A 2021 systematic review of 6,500 porcelain veneers estimated 95.5% survival at 10 years. Fracture and debonding were the most common problems, mostly in the first two years. Veneers bonded mostly to enamel did better than those bonded to large areas of dentin.
Is e.max a good choice if I grind my teeth?
The ADA says veneers may not suit people who clench or grind, so talk to your dentist first. If veneers go ahead, the stronger material and a night guard are commonly discussed options. Your dentist decides based on your bite.
Sources
- Soares-Rusu IBL, et al. Clinical Evaluation of Lithium Disilicate Veneers Manufactured by CAD/CAM Compared with Heat-pressed Methods: Randomized Controlled Clinical Trial. Operative Dentistry 46(1) (2021). operative-dentistry.kglmeridian.com
- Ivoclar: IPS e.max Press product information. zoolu.ivoclar.com
- Alenezi A, et al. Long-Term Survival and Complication Rates of Porcelain Laminate Veneers in Clinical Studies: A Systematic Review. J Clin Med (2021). pmc.ncbi.nlm.nih.gov
- Church TD, et al. Translucency and strength of high-translucency monolithic zirconium oxide materials. General Dentistry (2017). agd.org
- American Dental Association, MouthHealthy: Veneers. mouthhealthy.org
- Elkaffas AA, et al. Randomized Clinical Trial on Direct Composite and Indirect Ceramic Laminate Veneers in Multiple Diastema Closure Cases: Two-Year Follow-Up. Materials (Basel) (2024). pmc.ncbi.nlm.nih.gov
- Bookimed (marketplace price snapshot): Emax veneers in Colombia, prices updated October 2026. us-uk.bookimed.com
- RCN Radio: ReTHUS, así puedes verificar si un médico o profesional de salud está autorizado para ejercer en Colombia (2026). newsroom.rcnradio.com
This article summarizes published guidance and prices for general information. It is not medical advice. A licensed professional who has examined you decides what treatment is right and whether you are fit to travel. Prices are published ranges as of October 2026, not quotes.